Pen Shape Visual Fault Locator is a compact but powerful fibre optical cable test tool, with an output power up to 10mW, which can be used to locate sharp bends & breaks in jacked or bare fibre within 10km. It can also be applied to identify the connectors in patch panels and identify the fibres during splicing operation. The choice of a continuous wave output mode for steady fault illumination or a flashing output mode makes for easier fault location.
- Easy Operated and Cost-Effective Visual Fault Locator
- Bright red laser at 650nm and rugged & waterproof design
- High fiber concentration and little divergence, easily penetrate through a 8~10km fiber.
- Quickly illuminate fiber breaks, damaged connectors on patch cords
- Features continuous and flashing modes for your convenience - Three-Phase Switch
- Universal 2.5mm connector output
| Wavelength |
650nm ± 20nm |
Output Power |
10mW |
| Dynamic Distance |
8-10km |
Housing Material |
Metal |
| Connector |
2.5mm Universal connector |
Operation Mode |
Pulsed (2Hz) and CW |
| Operation Temperature |
0~+60°C |
Storage Temperature |
-20~+70°C |
| Dimensions |
175x26x26mm |
Weight |
75g |
| Battery Type |
2 x AA |
Battery Life |
≥ 8 hours |
