TS-Plus is developed as a dedicated stripper mainly for ribbon fiber cable with thermal heater. With its simple and fast operation, anyone can do clear stripping with near-zero failure. It is a very stable tool with natural grip and compact design. With easy hand operation, it provides long lasting battery capacity: approx. 500 times of ribbon fiber cable stripping. TS-PLUS is waterproof design, meet the requirement of KS waterproof first level.
Specifications
Fiber Material: Silica glass
Coating Material: UV cured resin
Coating Thickness: “Single fiber: 0.25~0.4mm 2 to 12 Ribbon fiber: 0.3~0.4mm”
Cladding Diameter: 125μm
Coating Removal Length: max 30mm
Heating Mode: Normal mode / Power save mode
Temperature Settings
Normal mode: approx. 80℃, 95℃, 110℃, 130℃
Power save mode: approx. 70℃, 80℃, 95℃, 110℃
Fiber Holder Type FH-2, FH-4, FH-6, FH-8, FH-10, FH-12, FH-250, FH-900
Power Supply Method
1) AC drive: AC100~240V, 50/60Hz
2) DIN port: DC 12V power supplied from fusion splicer
Operating Condition Temperature: 0℃~40℃ / Humidity: 0%~95%
Applicable Fiber Type
Single fiber: 250μm, 900μm, 3.0mm fiber cable and flat cable
Ribbon fiber: 2 to 12 ribbon fiber cable
Heating Time
Approx. 4~5sec at normal mode
Approx. 5~6sec at save mode
Battery Capacity Approx. 500 stripping with 12 ribbon fiber with a full charged battery
