The new LanCaster Pro-ST is a low-cost wire map tester which tests and certifies structured cabling continuity to TIA568A/B, USOC and ISDN standards. It displays on-screen wiring configurations showing the length of all 4 pairs and the length of the pair to fault up to 150m (500ft). The LanCaster Pro-ST will store up to 1000 test results which can be viewed or downloaded to a PC via the LanCaster Pro-ST software (provided) and then customised with your corporate identity and certificates produced displaying the customer's location/job, length, cable VP and testing standard. Maintaining all the proven features of the LanCaster, it identifies all common faults in wiring schemes, including open circuit wires, shorted pairs, shorts between pairs, crossed pairs, split pairs, pair reversals and shield/ screen continuity. In addition, the LanCaster Pro-ST has a large backlit screen. As with the standard LanCaster, the LanCaster Pro-ST can check installed wiring networks, alerting the operator if any telephone services are active on the cable test and can test for and indicate any other active services (10mb/s, 100mb/s, token ring etc.) to prevent accidental testing of a live network. In addition, a built-in tone generator (oscillator) transmits a warble tone into the cable enabling detection and tracing using a standard probe.
The Pro-ST comes complete with one intelligent remote office identifier, with a further 15 units available as optional accessories. LanCaster Pro-ST remotes are intelligent and indicate if the test has passed or failed.
Features:
- Rugged palm-top design
- Large backlit 128 x 64 graphical LCD
- Suitable for UTP, STP, FTP & SSTP cables
- Measuring range up to 150 metres (500ft)
- Stores up to 1000 test results
- Prevents accidental testing of a live network
- Built-in tone generator for pair tracing and identification
- Battery life: 7.5 hours of continuous testing
- Requires 4 x AA batteries
- Dimensions: 165 x 90 x 37mm Weight: 350g
